Report the ad
Breakout Board for AD5330 Parallel 8-Bit DAC - Bangalore
Thursday, 26 January, 2012Item details
City:
Bangalore, Karnataka
Offer type:
Offer
Item description
This is a simple breakout board for Analog Device's AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V).
The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at either 0V to VCC or 0V to 2VCC.
Input data to the AD5330 is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input resets the contents of the input register and the DAC register to all zeros. The AD5330 also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.
This breadboard friendly board breaks out every necessary pin of the AD5330 to 0.1" spaced headers. The board includes a decoupling capacitor, but does not do any voltage regulation; voltage supplied to the board should be within the specified range.
Dimensions: 0.80 x 1.10"
For more info visit www.tronixkart.com
The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at either 0V to VCC or 0V to 2VCC.
Input data to the AD5330 is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input resets the contents of the input register and the DAC register to all zeros. The AD5330 also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.
This breadboard friendly board breaks out every necessary pin of the AD5330 to 0.1" spaced headers. The board includes a decoupling capacitor, but does not do any voltage regulation; voltage supplied to the board should be within the specified range.
Dimensions: 0.80 x 1.10"
For more info visit www.tronixkart.com
Related ads
"This is a breakout board for Nordic's nRF24LU1+ system-on-chip wireless transceiver. The…
" The RFM22B is a low-cost ISM FSK transceiver module which offers communication at 433MHz ISM…
"This is a simple breakout board for the popular XBee product from Digi. This board breaks out…
"This is a breakout board for the powerful Bluegiga Bluetooth® SMD Module. The breakout board…
"We've revised the board by adding some LED indicators and also improving the overall…
"This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped…
"If you aren't familiar with the Electric Imp, it essentially provides an easy, integrated way…
Audio-Sound Module - SOMO-14D (Bangalore, Karnataka)
The SOMO-14D is a tiny audio module that can play back stored audio files from a micro-SD memory…
Breakout Board for RF-24G Transceiver "(arduino compatible)" (Bangalore, Karnataka)
We realized it's pretty difficult to attach to the tiny header on this great little wireless…
"Enable your next embedded project with FM broadcast ability. This small module packs some…
