Report the ad
RN-XV WiFly Module - SMA Connector "(arduino compatible)" - Bangalore
Saturday, 29 December, 2012
Item details
City:
Bangalore, Karnataka
Offer type:
Sell
Item description
"The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket without any other new hardware.
The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface.The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection.
Features:
Based on common 802.15.4 XBee footprint
Ultra low power: 4uA sleep mode, 38mA active
Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
Firmware configurable transmit power: 0dBm to 12dBm
Hardware interfaces: TTL UART
Host data rate up to 464Kbps over UART
Supports Adhoc and infrastructure networking
8 general purpose digital I/O
3 analog sensor inputs
Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
Accepts 3.3VDC regulated power supply
SMA connector
"We have 3000+ such products. For more details visit www.tronixkart.com or call +91 80 4110 4072 & ask for Prashant, I would be happy to help
The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface.The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection.
Features:
Based on common 802.15.4 XBee footprint
Ultra low power: 4uA sleep mode, 38mA active
Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
Firmware configurable transmit power: 0dBm to 12dBm
Hardware interfaces: TTL UART
Host data rate up to 464Kbps over UART
Supports Adhoc and infrastructure networking
8 general purpose digital I/O
3 analog sensor inputs
Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
Accepts 3.3VDC regulated power supply
SMA connector
"We have 3000+ such products. For more details visit www.tronixkart.com or call +91 80 4110 4072 & ask for Prashant, I would be happy to help
Related ads
"The BlueSMiRF RPSMA is the latest Bluetooth wireless serial cable replacement from Spark Fun…
" This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any…
" The smallest, most powerful, and most versatile GPS receiver we carry just got more…
"The Copernicus II is a great new GPS module from Trimble, but the SMD module prohibits…
"The Ubertooth One is an open source 2.4 GHz wireless development platform suitable for…
"This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect…
"2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping…
"We've revised the board by adding some LED indicators and also improving the overall…
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that…
"This is a breakout board for Nordic's nRF24LU1+ system-on-chip wireless transceiver. The…
